Posts tagged with "2011"

Intel Working On New ULV Sandy Bridge Processors Apple Could Use in MacBook Airs

CPU World reports (via MacRumors) that Intel is working on a series of new Core i5 and Core i7 ULV (ultra-low voltage) processors based on the Sandy Bridge architecture which, offering improved speed and graphics performances over the previous-gen Arrandale CPUs, might be a suitable choice for Apple in the next generation of MacBook Air models. The three new processors, Core i5-2557M, Core i7-2637M and Core i7-2677M, increase clock speed from 1.4 GHz and 1.6 GHz to 1.7 GHz and 1.8 GHz, with turbo boost frequencies set at 2.8 GHz and 2.9 GHz. With increased speeds, performances and the same 17 Watt thermal envelope, the new CPUs might as well end up being used by Apple in the MacBook Airs rumored to receive a Sandy Bridge and Thunderbolt update in June or July.

Two forthcoming Core i7 ULV dual-core processors, i7-2637M and i7-2677M, have 1.7 and 1.8 GHz base, and 2.8 GHz and 2.9 GHz Turbo Boost frequencies. This is 200 MHz higher than the frequencies of their predecessors, Core i7-2617M and i7-2657M. Default clock rate of the HD 3000 graphics on new chips stays the same, 350 MHz, although the maximum turbo frequency is increased to 1.2 GHz. The microprocessors boast 4 MB level 3 cache, and support HyperThreading and Vpro technologies. It is interesting to note that, despite of having lower processor number, the Intel i7-2637M SKU will be faster than the i7-2657M.

Low power consumption and speed are obviously factors Apple considers when selecting the processor to implement in thin and lightweight machines like the MacBook Airs. Whilst no release date has been announced by Intel yet, Apple usually gets components from Intel earlier than other companies, leading to speculation that the upcoming Air refresh may include the update Core i5 and Core i7 CPUs. Several reports in the past months indicated was working on a new version of the MBA line, last updated in October 2010, featuring Thunderbolt connectivity and faster processors following recent hardware changes to the MacBook Pros and iMacs.

Munster: NPD Data Suggests Slow Mac Sales in April

Citing data compiled by the NPD, Piper Jaffray’s Gene Munster says [via Barron’s] Mac sales in April have been slow, mainly due to the MacBook refreshed last year that “set the bar high”, but is still nowhere to be seen in 2011. Indeed, speculation in the past months had pegged Apple’s white MacBook to be headed towards discontinuation, leaving room for the popular MacBook Airs as the new Mac OS X entry line.

Piper Jaffray’s Gene Munster this afternoon offers an update on how Apple (AAPL) computer sales are trending: It was slow in April, he writes, according to U.S. sales data compiled by NPD, thanks to a MacBook refresh a year ago that set the bar high for Apple’s year-over-year comparison.

Apple shipped 9% more units in April than a year earlier, while the Street is modeling the entire June quarter to see an increase of 22%, to 4.2 million units.

NPD data posted in February revealed a 20% increase in year-over-year Mac sales, with Apple set to sell 3.6 million Macs in the quarter – as announced at the Q2 2011 earnings call, Apple eventually sold 3.76 million units. Munster is confident that, in spite of slow sales in April, Apple will hit the Street consensus of 22% growth for the entire June quarter; on the other side of the product line, iPod sales are also expected to be better than the 10-15% drop Munster initially projected.

New iMacs Can Only Use Apple’s Hard Drives

One of the perks of having an iMac, be it a 21.5-inch or 27-inch model, is that you’re signing up for an all-in-one solution that packs everything you need into a “screen” that only needs to be placed your desk, connected to a power source, and it’s ready to go. The iMac – certainly Apple’s top choice in the consumer desktop line – isn’t meant to offer “user serviceable parts”, meaning what you get with Apple’s standard configuration is what you’ll have to stick with until the end of the product’s life cycle. In the past years, however, users who wanted to customize their iMac experience with custom parts like, say, different internal hard drives or better RAM, were able to open an iMac (provided they followed the complex instructions that require to pay attention when disassembling the aluminum enclosure and display) and fit in compatible components to enhance the performances of the machine.

As noted by Michael at Other World Computing’s blog, however, the new 2011 iMacs – the ones with Thunderbolt, Sandy Bridge processors and better graphics – don’t allow you to use any other hard drive but Apple’s custom ones, which are running a custom firmware to provide temperature monitoring through a new 7-pin SATA connector.

For the main 3.5″ SATA hard drive bay in the new 2011 machines, Apple has altered the SATA power connector itself from a standard 4-pin power configuration to a 7-pin configuration. Hard drive temperature control is regulated by a combination of this cable and Apple proprietary firmware on the hard drive itself. From our testing, we’ve found that removing this drive from the system, or even from that bay itself, causes the machine’s hard drive fans to spin at maximum speed and replacing the drive with any non-Apple original drive will result in the iMac failing the Apple Hardware Test (AHT).

In examining the 2011 27″ iMac’s viability for our Turnkey Upgrade Service, every workaround we’ve tried thus far to allow us to upgrade the main bay factory hard drive still resulted in spinning fans and an Apple Hardware Test failure. We swapped the main drive out (in this case a Western Digital Black WD1001FALS) with the exact same model drive from our inventory which resulted in a failure. We’ve installed our Mercury Pro 6G SSD in that bay, it too results in ludicrous speed engaged fans and an AHT failure. In short, the Apple-branded main hard drive cannot be moved, removed or replaced.

To add insult to injury, the latest iMac EFI Update 1.6 unleashed 6Gb/s speeds on two internal ports – and naturally, one of them is the proprietary, firmware-limited, 7200RPM main drive that can’t take advantage of those speeds anyway.

Michael argues that by “closing” the system, Apple’s being evil in not allowing geeks and users who buy stuff on OWC or other Mac hardware shops to upgrade their iMacs to better configurations. As Marco Arment explains though (and I personally agree with him here), the iMac’s not really meant for fiddling and user customizations. Like I said above, when you purchase an iMac you’re signing up for the all-in-one idea of a machine that provides Apple’s latest and greatest innovations in desktop miniaturization technology – by using custom cables, firmwares and hard drives, Apple makes sure you get the best performances out of your iMac, with the “downside” of being unable to customize it. This aspect, of course, can also be seen a way for Apple to make sure that angry modders don’t queue up in the Apple Store asking for free replacements when they purposely opened an iMac to play around with its internals.

You can always find an old iMac online and make it your main machine to mod and improve over time, but you won’t be able to enjoy the improvements in Sandy Bridge architecture and Thunderbolt connectivity. And those, if you ask me, are pretty convincing reasons to get a 2011 iMac and stick with its default hard drives.

New iMacs To Use SSDs As A “System Cache” For Spinning Hard Drives?

Yesterday, we noted the new iMacs featuring Sandy Bridge processors and Thunderbolt technology came with an option in the Apple Store’s online configuration page to pack a hybrid Serial ATA Drive + SSD setup at an additional cost. What’s curious about this hybrid setup is the note left by Apple to inform users that OS X will come preinstalled on the solid state drive, leaving space for documents and other media on the bigger (but slower) spinning hard drive.

iMac also offers an optional 256GB solid-state drive (SSD), which has no moving parts and delivers increased drive performance for many operations. The 256GB SSD can be purchased in place of the standard hard drive or in addition to it.

If you configure your iMac with both the solid-state drive and a Serial ATA hard drive, it will come preformatted with Mac OS X and all your applications on the solid-state drive. Then you can use the hard drive for videos, photos, and other files.

This led to speculation as to whether Apple was planning to install OS X on the SSD and show the other drive as a mounted volume in the Finder, or they developed a brand new system to automatically handle the processing of files and system info across the SSD and the spinning drive. Several bloggers and Mac users wondered how Apple could manage to easily allow the new iMacs to quickly switch between drives, save the OS on one drive and media on the other, symlink the user’s Home folder to content saved outside the SSD. These technical questions also had to face the 4-6 week delay that showed up when ordering a new iMac with hybrid configuration. However, the solution may be pretty simple, as it could lie in Apple’s use of Intel’s new Z68 platform, which – combined with the upcoming “Larsen Creek” SSDs – allows for a new caching system called “Smart Response Technology.” Intel’s BD82Z68 Platform Controller Hub is indeed being used in the mid-2011 iMacs, as iFixit confirmed earlier today.

Intel’s Smart Response Technology works like this: in a hybrid configuration such as the one possible in the new iMacs, the smaller SSD acts as a “system cache” for the bigger & slower HDD. The OS (boot files, resources, extensions) are cached on the SSD for faster loading times, but the user only sees one drive in the Finder / Windows Explorer.

Smart Response provides a middle ground between capacious but slow and inexpensive hard drive storage, and fast but small and expensive SSD. With it, one can retain a high-capacity hard drive, and speed it up using a small SSD. The technology uses the small SSD’s low access times and high speeds to make it work as a cache of the HDD, it might even store copies of key parts of the HDD such as the boot volume and system files, to make booting faster, and the system more responsive overall.

It’s not clear at this point whether the delay in shipping times is caused by Apple waiting for Intel’s new solid state drives, and if Smart Response Technology will be enabled at all in Snow Leopard. Apple’s note on OS X coming preinstalled on the SSD surely raises some important technical questions, and we’ll know more in a few weeks when these hybrid iMacs will start showing up. [TonyMacx86 via 9to5mac]

New iMacs: Teardown, First Benchmarks

Following yesterday’s release of the new iMacs with Sandy Bridge processors and Thunderbolt technology, the guys over at iFixit immediately started tearing down a 21.5-inch model. In their official teardown article, available here, there are a few notes of interest: iFixit notes how, design-wise, nothing much has changed in the new iMacs, which can be opened in the same way of the old generation units by pulling off the magnetically-held glass and removing the screws holding the LCD in place. The display is manufactured by LG and it’s the same used in the previous-generation iMac. iFixit also gives the machine a 7/10 Repairability Score, noting that average users can easily replace RAM, but accessing the CPU and GPU requires to take out the whole logic board, which is described as a “tricky process.” The teardown also reveals the Thunderbolt connector is similar (but not the same) to the one found in the early-2011 MacBook Pros; one heat sink is reserved for the CPU, with the other assigned to the GPU. Read more

AT&T Rep Says No iPhone 5 In June or July

In the past months, a number of reports from different sources have indicated Apple has no plans to introduce a new iPhone at the WWDC event in June, which is going to be software-focused with previews of OS X Lion and iOS 5. The next-generation iPhone – according to many simply called iPhone 5 following the trend set by the iPhone 4 and iPad 2 – is rumored to be unveiled at Apple’s usual September media event – where the company will also release a final version of iOS 5 and roll out its revamped cloud services. Again, according to the rumors, Apple is doing this in order to shift the iPhone’s release date against the much more profitable holiday season, and a September / Fall 2011 release would make sense for such a strategy.

MacRumors reports today an AT&T customer care representative told a reader that Apple didn’t inform the carrier of any new iPhone in June or July, though there will be one in the future. This customer called AT&T to ask about his eligibility date for a subsidized upgrade, which had been pushed back by five months without reason. As MacRumors reports, this is what the AT&T rep told the customer:

Apple has informed us that they do not plan to release the iPhone in the June to July timeframe, though there will be a newer version in the future. Unfortunately, we have not been given a release time for the new phone. We will release this information on our website when it is available to us.

Information coming from customer care representatives is usually unreliable as these people don’t have access to the company’s fully disclosed plans and operations, and they shouldn’t be able to inform customers of alleged plans and future release dates anyway. However, the statement does seem to confirm previous speculation of a new iPhone slated for a Fall release, with no new model this Summer as Apple has just released a white iPhone and a CDMA version before that in February.

New iMac Notes: Dual External Display Output, OS X on SSD - No Video Input? [Updated]

Following this morning’s refresh of the iMac – you can read more about it here – a few technical tidbits have started popping up on the Internet causing some interest and speculation from Apple fans and bloggers. Among the new features of the updated line – such as improved graphics, and new Intel “Sandy Bridge” processors – support for the Thunderbolt technology on the 27-inch iMacs has been extended, as the bigger models now come with two Thunderbolt ports to use for data transfer, daisy-chaining of external drives and peripherals and, as noticed and confirmed with Apple by GigaOM, dual external display output. Support for dual display out through Thunderbolt means you’ll be able to connect two external monitors to the new 27-inch iMac, and output the computer’s screen to the monitors simultaneously. This is great news for those who like external vertical monitor setups, and it’s now made extremely easy by the Thunderbolt ports located on the back of the iMac.

One of the most exciting things about today’s new iMacs (and the thing that will probably result in me buying one) are the dual Thunderbolt ports on the 27-inch iMac. They’re great in that they provide a lot of potential I/O transfer power, but more importantly because it allows the new iMac to output to two external monitors simultaneously, Apple confirmed to me this morning.

Achieving a similar setup was possible before, but it required users to buy USB or VGA adapters that resulted in loss of quality and poor performances when compared to native, wired Mini DisplayPort connections. Thanks to Thunderbolt’s daisy-chaining functionality, using both Thunderbolt ports for dual display output doesn’t mean you’ll be forced to constantly plug in and disconnect peripherals: if you own a Thunderbolt-based external drive, you’ll be able to connect it to the iMac, and then plug a secondary display into the drive’s Thunderbolt port. This way, Thunderbolt is used at its full capacity and you still retain the possibility to output to two different monitors simultaneously. Read more

Apple Q2 2011 Financial Results: $24.67 Billion Revenue, 4.69 Million iPads, 18.65 Million iPhones Sold

Apple has just posted their Q2 2011 financial results. The company posted revenue of $24.67 billion, with 4.69 million iPads sold, 18.65 million iPhones and 3.76 million Macs. Wall Street consensus estimate was EPS of $5.36 and revenue of $23.34B. Mac sales saw a 28% increase over the year-ago quarter, while with 9.02 million iPods sold Apple saw a 17% unit decline. Overall, the company posted quarterly revenue growth of 83% and profit growth of 95%. International sales were 59% for the quarter, with Asia and Pacific regions featuring a 182% increase year over year. The reported iPhone sales were stronger than expected by most analysts, with a 113% increase year over year. iPhone revenues, however, grew faster than sales with a 126% increase [source]. Overall, this was the biggest non-holiday quarter in Apple’s history.

With quarterly revenue growth of 83 percent and profit growth of 95 percent, we’re firing on all cylinders,” said Steve Jobs, Apple’s CEO. “We will continue to innovate on all fronts throughout the remainder of the year.

In Q1 2011, the company posted a record revenue of $26.74 billion with 7.33 million iPads sold, 16.24 million iPhones and 4.13 million Macs. In the year-ago quarter, Apple posted revenue of $13.50 billion and net quarterly profit of $3.07 billion. The company sold 2.94 million Macs, 8.75 million iPhones and 10.89 million iPods during the quarter.

Apple will provide a live streaming audio feed of its Q2 2011 financial results conference call at 2:00 PM Pacific, and we’ll update this story with the conference highlights. Read more

Reminder: Apple Q2 Financial Results Today – 5 PM ET

Later today starting at 5:00 PM ET (2:00 PM PT) Apple will hold the Q2 2011 earnings call to announce their financial results, shortly after the markets close. An audio-only live streaming will be available here. We will offer a breakdown of the results and have a post in the homepage with continually updating notes from the earnings call.

In Q1 2011, the company posted a record revenue of $26.74 billion with 7.33 million iPads sold, 16.24 million iPhones and 4.13 million Macs. Today’s financial results will offer an insight into Verizon iPhone sales, which were rumored to be “low” and “under Apple expectations”, whilst AT&T has announced this morning 3.6 million iPhone activations in the first quarter. AT&T also revealed 322,000 3G tablets were sold in the quarter, but didn’t specify whether or not they were Apple iPads. Notes from Apple’s lawsuit against Samsung also indicated the company sold 60 million iPod touches since 2007, 19 million iPads and 108 million iPhones by March 2011. Considering Apple previously revealed 15 million iPads were sold from April to December 2010, analysts are expecting a minimum of 4.2 million iPads sold in the quarter. Analysts polled in the past weeks also predicted Apple might have sold nearly 20 million iPhones in the second fiscal quarter.

Tune in at 5PM ET for a full breakdown of the financial results and live updates from the earnings call.